Argos VC-403 User Manual (English)

Questions and Answers:

K
katherineochoaJul 31, 2025
Why won't my Argos VC-403 pick up?
- J
  Joshua DayJul 31, 2025
  Your Argos Vacuum Cleaner might not be picking up dirt due to several reasons. First, make sure the hose and tools are correctly attached. Second, check for any blockages in the hose or accessories that might be obstructing airflow. Third, the dirt container or dust bag might be full, requiring emptying or replacement. Finally, the filters could be blocked or clogged, so frequent cleaning of filters will maintain performance.
R
Robert SmithAug 6, 2025
What to do if my Argos Vacuum Cleaner does not switch on?
- A
  Alex RossAug 6, 2025
  If your Argos Vacuum Cleaner isn't switching on, there are a few things to check: 1. Ensure the unit is firmly plugged into a working mains socket and switched on. 2. Make sure the power button on the unit is depressed. 3. If the unit cut out during use, disconnect it from the wall socket, allow it to cool for one hour, clean the filters, empty the bin/dust bag, and check the hose/accessories for blockages. 4. If there is still no electricity to the power socket, seek expert help from a qualified electrician.
G
Gregory FoleyAug 12, 2025
Why does the blockage indicator activate on my Argos VC-403 Vacuum Cleaner?
- C
  collinskennethAug 12, 2025
  The blockage indicator on your Argos Vacuum Cleaner may activate due to a few reasons: * The filters, dust bag, or dirt container are blocked. Frequently cleaning filters will maintain performance. * The dust bag or dirt container is full, so check and empty the dirt container or replace the dust bag. * The accessories, hose, or tube are blocked. Inspect the air paths of the accessories, hose, and tubes for any obstructions.
S
Sharon HaynesAug 18, 2025
What to do if accessories won't pick up dust/debris with my Argos VC-403?
- Y
  youngsydneyAug 18, 2025
  If the accessories on your Argos Vacuum Cleaner aren't picking up dust or debris, consider the following: * Ensure you're using the correct tool for the task. * Check the air paths of the tools are not obstructed by blockages. * Frequently cleaning filters will maintain performance. * Check and empty the dirt container or replace the dust bag. * Check the air paths of the hose or tubes are not obstructed by blockages.