Argos VC-403 - Cleaning the Post Motor Filter; Clearing Blockages; Removing Debris from the Hose

7
MAINTENANCE
Cleaning the post motor filter
TA
P
Removing debris from the hose
NOTE: Disconnect the hose from the vacuum cleaner and remove any blockages found and then reconnect the hose securely.
!
CLEARING BLOCKAGES
BLOCKAGE INDICATOR: Located in front of the carry handle, the blockage indicator light will illuminate red when the filters, hose or dirt container have become
blocked. When this occurs empty the dirt container, check the filters and refer to the maintenance section of your instruction manual.
!
VC-403 Guide.qxd:Value 21/1/10 12:56 Page 9