Step 1:
- Assemble Allen Bolt ( A ) Spring Washer ( C ) and Flat Washer ( B ) and use to attach
Privacy panel to two Pedestal
Step 2:
Page 2 of 3
- Insert dowel pin of Privacy Panel into the pre drilled holes on both inner side of
twoPedestals.
- Firmly tighten Bolt
s using Allen Key ( D )
- Note : To aid in placement, do not fully tighten Bolt until all are threaded into place
- Gently lay the Desk Top on two Pedestal half way forwand. Slide the Desk Top ( E )
backward until the rail underneath the Top lock with the back rail on the Pedestal.
To Next Page