Step 3:
- Pull Top Drawer of Pedestal out.
- Assemble Allen Bolt ( A ) Lock Washer ( C )and Flat Washer ( B ) and use to attach Pedestal to
Desk top
- Firmly tighten Bolt using Allen Key ( D )
- Note : To aid in placement, do not fully tighten Bolt until all are threaded into place.
Step 4:
- If the Desk is uneven, adjust the levelers on the bottom of each leg by twisting them clockwise or
counter clockwise until the Desk is even.
Page 3 of 3
To Next Page