Ariens 891008 - INSTALL HOSE ADAPTER

EN - 15
5. Position bagger post ends onto bagger
mounts. See Figure 19.
6. Ensure bagger posts are securely
engaged in bagger mounts. Lift and rotate
bagger post until bagger arms lock onto
the bagger support bolts. Ensure both
sides are latched. See Figure 20.
7. Tighten all hardware.
8. Remove bags from bagger. Install bagger
frame to bagger post with two 1/2" x 2
1/4” hex bolts (Item 17) and two 1/2” top-
lock flange nuts (Item 9). See Figure 21.
INSTALL HOSE ADAPTER
1. Install hose adapter (Item 14) and secure
with four 5/16" x 1" round head square
neck bolts (Item 16) and four 5/16” top-
lock flange nuts (Item 15). Bolts are
installed from the inside with the nuts on
the outside. See Figure 22.
WARNING: AVOID INJURY.
Ensure that both left and right
latches are securely locked in
position.
Figure 19
Figure 20
Figure 21
17
9
Figure 22
15
14
16