Ariens 915267 - User Manual

30 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

915265 – IKON XD 42

(SN 000101+)

915266 – IKON XD 52

(SN 000101 +)

915267 – IKON XD 52

(SN 000101 +)

915268 – IKON XD 42

(SN 000101 +)

915273 – IKON XD 60

(SN 000101 +)

Operator’s Manual

Manuel du Utilisateur

05278800B • 6/20

Printed in USA

ENGLISH

FRANÇAIS

E10

IKON XD

™

Models

Table of Contents

Questions and Answers

S
Susan WongAug 15, 2025
Why Ariens 915267 Lawn Mower engine does not start?
- A
  Alyssa MartinezAug 15, 2025
  Several factors can prevent your Ariens Lawn Mower engine from starting. It could be due to the Safety Interlock System not being engaged or being faulty. The fuel tank might be empty, or the fuel supply could be contaminated, requiring replacement with clean fuel. A discharged battery or a poor connection between the battery and cables could also be the cause, so ensure the battery is charged and the connections are tight and clean. Loose spark plug wires or faulty spark plugs may also be responsible; connect the wires or replace the spark plugs as needed. In some cases, the electrical system or the engine itself may be faulty, requiring assistance from your Ariens dealer.
R
rrobertsonAug 18, 2025
What to do if Ariens Lawn Mower has poor cutting quality?
- S
  Sabrina StevensAug 18, 2025
  If your Ariens Lawn Mower isn't cutting properly, several factors could be the cause. The mower blades might not be level, or the mower deck pitch could be incorrect; level and adjust them as needed. Dull or faulty mower blades can also lead to poor cutting, so sharpen or replace them. If you're mowing too fast, try driving slower. Also, check if the cutting height is too low, and avoid setting it too low; for very tall grass, mow twice. Poor belt tension or condition can also affect cutting quality.
T
Tiffany HowellAug 21, 2025
Why Ariens 915267 Lawn Mower engine runs rough?
- D
  Daniel LoweAug 21, 2025
  If your Ariens Lawn Mower engine is running rough, it might be due to the choke control knob being in the 'on' position; move it to the 'off' position. Another possible cause is a plugged air filter cartridge, which should be cleaned or replaced. In some cases, the engine itself may be faulty.
M
Michelle BlevinsAug 25, 2025
What to do if Ariens Lawn Mower engine overheats?
- C
  Cheryl WilkersonAug 26, 2025
  If your Ariens Lawn Mower engine is overheating, check the engine oil level and add oil if it's low. Also, inspect the cooling fins for blockages and clean the engine if necessary. In some cases, the engine itself may be faulty.
A
Anthony FergusonAug 28, 2025
What to do if Ariens 915267 Lawn Mower does not drive?
- R
  Raymond LivingstonAug 28, 2025
  If your Ariens Lawn Mower isn't driving, first check if the transaxles are bypassed and engage the levers if they are. The ground drive belt might also be faulty. In some cases, the transaxles themselves may be faulty.
A
Andrew SmithAug 31, 2025
Why Ariens 915267 PTO malfunctions?
- D
  David MartinAug 31, 2025
  If the PTO on your Ariens Lawn Mower is malfunctioning, make sure the operator presence switch is activated by sitting on the operator seat. The operator presence switch might be faulty. Other potential issues include a faulty deck drive belt, or a faulty PTO switch, wiring, connectors, or clutch.
V
Virginia DaySep 3, 2025
What to do if Ariens 915267 does not track straight?
- M
  Michelle JenkinsSep 3, 2025
  If your Ariens Lawn Mower isn't tracking straight, start by checking the tire pressure. If the pressure is incorrect, adjust it accordingly. The steering levers may also need adjustment. In some cases, the transaxles and/or linkages may need adjustment.
T
Tammie BarrettSep 7, 2025
Why Ariens 915267 moves with engine off and parking brake engaged?
- R
  rachel84Sep 7, 2025
  If your Ariens Lawn Mower moves with the engine off and the parking brake engaged, it could be that the parking brake needs adjustment or is faulty.
E
Eric FreySep 12, 2025
Why Ariens 915267 creeps when steering levers are in neutral position?
- C
  Courtney FrazierSep 12, 2025
  If your Ariens Lawn Mower creeps when the steering levers are in the neutral position, it may be that the transmission and/or linkage need adjustment.

Ariens 915267 Specifications

General

Brand	Ariens
Model	915267
Category	Lawn Mower
Language	English

Related product manuals

Preview: Ariens 915213 – Zoom 42

Ariens 915213 – Zoom 42

Preview: Ariens 915131-1334

Ariens 915131-1334

Preview: Ariens IKON-X 915175

Ariens IKON-X 915175

Preview: Ariens 915131-Zoom 34

Ariens 915131-Zoom 34

Preview: Ariens 915013-1742 EZR

Ariens 915013-1742 EZR