Ariens 921028 User Manual

48 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

04585100F • 2/14

Printed in USA

Owner/Operator Manual

Manuel Du Propriétaire/Utilisateur

E10

The use of any gasoline exceeding 10% ethanol (E10) or

10% MTBE will void the product warranty.

L’utilisation d’une essence contenant plus de 10% d’éthanol

(E10) ou de 10% de MTBE annulent la garantie.

Models

921023 – Deluxe 28 Track

(SN 095000 – 099,999)

921024 – Deluxe 24

(SN 000101 – 099,999)

921028 – Deluxe 24 Platinum

(SN 000101 +)

921029 – Deluxe 30 Platinum

(SN 000101 – 099,999)

921030 – Deluxe 28

(SN 000101 – 099,999)

921032 – Deluxe 30

(SN 000101 – 099,999)

921035 – Deluxe 28

(SN 000101 +)

921036 – Deluxe 28

(SN 000101 +)

921037 – Deluxe 28

(SN 016,101 +)

921 Series

Sno-Thro

®

ENGLISH

FRANÇAIS

Table of Contents

Questions and Answers:

R
Ruth McdonaldAug 9, 2025
Why won't my Ariens Snow Blower engine crank or start?
- S
  samuel17Aug 10, 2025
  There are several potential reasons why your Ariens Snow Blower engine might not crank or start: * The fuel tank could be empty, so ensure you fill it. * The fuel shut-off valve might be closed; make sure it's open. * There might be a buildup of dirt and residue around the governor/carburetor, so clean that area. * The key switch may not be in the run position; put it in the correct position. * The electric starter could be malfunctioning; check for a bad starter or loose connections.
A
Amanda SmithAug 16, 2025
What to do if my Ariens 921028 doesn't throw snow properly?
- S
  Stacy RichardsonAug 16, 2025
  If your Ariens Snow Blower isn't throwing snow well or at all, consider these possibilities: * The shear bolts might be broken; replace them. * The attachment clutch/brake may not be adjusted properly; adjust it. * The impeller could be frozen in place; move the unit to a warm place to thaw it. * Ice or debris might be obstructing the auger; with the engine off and the auger disengaged, check for and remove any obstructions. * The attachment drive belts might be slipping, worn, or damaged.
D
Donna DavidAug 21, 2025
Why does my Ariens 921028 Snow Blower engine keep stopping?
- B
  brendaphillipsAug 21, 2025
  Your Ariens Snow Blower engine may stop due to several reasons: * You might be out of fuel, so refill the fuel tank. * The fuel shut-off valve could be closed; open it. * There might be a mechanical jam in the blower rake or impeller. If so, turn off the engine, remove the key, wait for all moving parts to stop, and then check for and remove any obstructions before restarting. * The fuel supply could be polluted; replace it with clean fuel. * The spark plug might be faulty; replace or clean it. * The fuel cap vent could be plugged; replace the fuel cap.
B
Benjamin JonesAug 27, 2025
What to do if Ariens Snow Blower runs briefly then stops?
- A
  Allen FrancoAug 27, 2025
  If your Ariens Snow Blower runs briefly and then stops, it might be due to a buildup of fumes in the fuel tank creating too much pressure. Carefully loosen the fuel tank cap to relieve the pressure.
B
Benjamin FieldsSep 3, 2025
Why are there small rubber beads collecting in the frame of my Ariens 921028 Snow Blower?
- J
  Jay WheelerSep 3, 2025
  The small rubber beads collecting in the frame of your Ariens Snow Blower are likely due to normal friction disc wear. However, if you notice chunks or large pieces of rubber, you should check the friction disc and replace it if necessary.

Ariens 921028 Specifications

General

Product Type	Two-stage snow blower
Engine	Ariens AX
Engine Type	4-cycle
Engine Displacement (cc)	254
Clearing Width (in)	28
Clearing Height (in)	21
Intake Height (in)	21
Forward Speeds	6
Reverse Speeds	2
Chute Control	Remote
Auger Type	Steel
Start Type	Recoil
Starter Type	Electric
Tire Size (in)	16

Summary

SAFETY

SAFETY ALERTS

Symbols and meanings for important safety precautions.

NOTATIONS AND PRACTICES

General information and safe working precautions.

REQUIRED OPERATOR TRAINING

Ensures proper operation by trained individuals.

SAFETY DECALS AND LOCATIONS

Identification and placement of safety decals.

ASSEMBLY

Tools Required

Handlebar Assembly

Wire Harness and Trigger Cable

Discharge Chute and Controls

Skid Shoes Adjustment

OPERATION

FUEL SYSTEM

PRE-START CHECKS

Impeller and Clutch Checks

Verifying impeller is not frozen and clutches function.

Axle Lock Pins and Skid Shoes

Adjusting axle pins and skid shoes.

Engine Starting Procedures

Steps for manual and electric engine starting.

MAINTENANCE

MAINTENANCE SCHEDULE

Recommended maintenance tasks and intervals.

Engine Oil Checks

Procedures for checking and changing engine oil.

Auger Gearcase Maintenance

GENERAL LUBRICATION

SERVICE AND ADJUSTMENTS

Scraper Blade and Skid Shoes

Shear Bolts

Chute Controls Adjustment

Clutch and Belt Adjustments

TROUBLESHOOTING

Engine Start/Stop Issues

Diagnosing and fixing engine starting or stopping problems.

Drive and Snow Throwing Problems

Addressing issues with forward/reverse movement or snow throwing.

Related product manuals

Ariens 921022 - Deluxe 28

Ariens 921027 - Deluxe 28

Preview: Ariens 921017

Preview: Ariens 921011 - DELUXE 24

Ariens 921011 - DELUXE 24

Ariens 921013 - DELUXE 30

Preview: 921017 - Deluxe 24 Platinum

921017 - Deluxe 24 Platinum