Need help?Do you have a question about the Ariens EZRider 915 Series and is the answer not in the manual?
General| Transmission | Hydrostatic |
|---|---|
| Deck Material | Steel |
| Cutting Width | 42 inches |
| Blade Engagement | Electric |
| Warranty | 3 years |
Expresses gratitude for purchasing Ariens equipment and emphasizes value and durability.
Provides steps for resolving questions and highlights the importance of contacting an Ariens dealer.
Guides the operator to read all supplied manuals for safe operation and maintenance understanding.
Explains the importance of knowing model and serial numbers for ordering parts and inquiries.
Details the process of product registration to activate the warranty and the use of genuine parts.
States Ariens' right to make changes and disclaims liability for unauthorized parts.
Explains the Safety Alert Symbol and the DANGER, WARNING, and CAUTION signal words used in the manual.
Emphasizes safe practices, adherence to laws, and the need for operator training.
Identifies the location of safety decals on the unit and stresses the need to replace missing ones.
Covers walk-around inspections, clearances, work area safety, and avoiding falls and slippery surfaces.
Discusses the importance of safety guards, discharge covers, interlock systems, and brakes.
Details rules for operation, child safety, pre-start, speed, PTO control, and avoiding tip-overs.
Provides guidance on operating safely on slopes and maintaining traction.
Stresses operator training, avoiding drugs/alcohol, and wearing appropriate safety gear.
Advises on avoiding pinch points, hot surfaces, entanglement, and rotating parts.
Details safety steps before performing maintenance, including engine shutdown and cooling.
Covers safety precautions when handling fuel and ensuring hardware tightness.
Addresses risks associated with batteries, including electric shock and explosive gases.
Provides guidelines for safe transportation and awareness of attachment effects on stability.
Identifies key controls like steering levers, throttle, and ignition switch for unit operation.
Provides step-by-step instructions for starting and safely shutting off the engine.
Details checks for tires, engine oil, and seat adjustment before starting the engine.
Emphasizes testing all controls and safety devices before engine start to prevent injury.
Provides step-by-step instructions for starting and safely shutting off the unit's engine.
Guides users on engaging the mower and starting the mowing process.
Instructs on how to safely park the unit and secure it to prevent roll-away.
Offers advice on mowing techniques, grass conditions, blade sharpness, and lawn appearance.
Covers fuel tank safety precautions and proper fueling procedures.
Stresses the importance of keeping all hardware tight and equipment in safe working condition.
Details engine maintenance and checks for the cooling system and oil level.
Provides instructions for draining and changing the engine oil.
Outlines steps for replacing mower drive, rotary mower, and transaxle belts.
Details the procedure for replacing the clutch shaft belt.
Explains where and how often to lubricate pivot points and fittings.
Covers tire pressure checks and safety precautions for hydraulic systems.
Provides instructions on safely sharpening and balancing mower blades.
Details how to remove the battery and check its electrolyte level.
Outlines safe procedures for charging a discharged battery using a charger.
Provides step-by-step instructions for safely jump starting the unit's engine.
Explains how to adjust the speed control lever for neutral positioning.
Details procedures for adjusting the parking brake and the operator's seat.
Guides on checking and adjusting the mower deck for side-to-side levelness.
Explains how to adjust mower pitch and cutting height.
Describes the function of the mower belt idler system for constant tension.
Presents detailed technical specifications for different EZRider models.
Outlines the warranty coverage, limitations, and purchaser responsibilities.
Details service procedures, warranty exclusions, and disclaimers of further warranties.
Provides Ariens company contact information and lists other available product lines.
To Next Page
