Need help?Do you have a question about the Ariens Max Zoom 2552 and is the answer not in the manual?
General| Engine | Kawasaki FR691V |
|---|---|
| Engine Power | 24 HP |
| Engine Displacement | 726 cc |
| Cutting Width | 52 inches |
| Transmission | Hydrostatic |
| Deck Material | 10-gauge steel |
| Self-Propelled | Yes |
| Speed Settings | Variable |
| Mulching Capability | Yes |
| Bagging Capability | Optional |
| Side Discharge Capability | Yes |
| Cutting Height | 1.5 - 4.5 inches |
| Oil Capacity | 2 quarts |
Explains safety alert symbols and signal words used in the manual and on decals.
Defines DANGER, WARNING, CAUTION signal words and general safety practices.
Details dangers of rotating parts and serious injury/death scenarios.
Covers warnings, hot surfaces, rotating parts, and general safety rules for operation.
Advises on operating on slopes, handling fuel, and battery safety precautions.
Warns about tire service hazards and critical interlock/control system failures.
Explains steering, ignition switch, and safety interlock system testing.
Lists essential checks including safety interlock, air cleaner, fluids, and seat adjustment.
Details how to stop the unit in an emergency and start/stop the engine.
Lists checks for each use, 25/50 hour intervals, and 100/400 hour intervals.
Guides on checking fluid levels and adding 20W-50 engine oil to the system.
Details the procedure for changing hydraulic fluid and the filter.
Guides on eliminating excessive creeping by adjusting the steering control neutral mechanism.
Details how to check and adjust blade level and deck pitch.
To Next Page