Ariens Sno-Thro Deluxe 27 User Manual (English)

Questions and Answers:

W
William HarrisAug 10, 2025
How to troubleshoot why my Ariens Sno-Thro Deluxe 27 Snow Blower engine will not crank/start?
- D
  Donna MorrowAug 10, 2025
  If your Ariens Snow Blower engine won't crank or start, there are several possible causes. First, make sure the fuel tank isn't empty and fill it if needed. Next, check that the fuel shut-off valve is open. Also, ensure the key switch is in the run position. A buildup of dirt around the governor or carburetor could also be the problem, so clean that area. Finally, if you're using the electric starter, check it for bad connections or a faulty starter.
H
harrisadamAug 16, 2025
What to do if my Ariens Sno-Thro Deluxe 27 Snow Blower unit throws snow poorly or not at all?
- L
  Lauren CoxAug 16, 2025
  If your Ariens Snow Blower isn't throwing snow well, or not throwing snow at all, here's what to check: * Broken shear bolts: Replace them. * Auger is frozen: Move the unit to a warm place to thaw it. * Obstructions: With the engine off and auger disengaged, check for and remove any ice or debris obstructing the auger. * Slipping, worn, or damaged attachment drive belts: Adjust or replace the attachment drive belts. * Attachment clutch/brake: Properly adjust the attachment clutch/brake.
M
Michael DoughertyAug 22, 2025
Why my Ariens Sno-Thro Deluxe 27 Snow Blower does not operate in Forward / Reverse?
- M
  muelleramandaAug 22, 2025
  If your Ariens Snow Blower does not operate in forward or reverse, it could be due to a few reasons. The friction disc may not be adjusted properly, in which case you should repair or replace it. Also, the traction belt might not be functioning correctly, so repair or replace the traction drive belt. Lastly, the speed selector may need adjustment.
R
Raymond WilliamsAug 28, 2025
Why does my Ariens Sno-Thro Deluxe 27 engine keep stopping?
- J
  Jonathan WardAug 28, 2025
  There are several reasons why your Ariens Snow Blower engine might stop. The first thing to check is the fuel level; if it's low, fill the fuel tank. Also, ensure that the fuel shut-off valve is open. A mechanical jam in the blower rake or impeller could also cause the engine to stop. In this case, turn off the engine, remove the key, wait for all moving parts to stop, and then check for and remove any obstructions before restarting. Polluted fuel or a faulty spark plug can also be culprits; replace the fuel with clean fuel or replace/clean the spark plug.
D
Daniel GonzalezSep 3, 2025
Why does my Ariens Snow Blower have small rubber beads collecting in the frame?
- N
  Norman BrownSep 3, 2025
  The small rubber beads collecting in the frame of your Ariens Snow Blower are likely due to normal friction disc wear. However, if you notice chunks or large pieces of rubber, it's a sign that the friction disc should be checked and replaced if necessary.