Need help?Do you have a question about the Ariens Sno-Thro ST724 and is the answer not in the manual?
Guidance on manuals, service parts, product registration, and delivery responsibilities.
Explanation of alert symbols, signal words, and the necessity of operator training.
Adherence to safe working precautions, alertness to unsafe conditions, and applicable laws.
Importance of safety decals and understanding DANGER, WARNING, and CAUTION messages.
Walk around inspection, clearances, work area safety, and avoiding falls on slippery surfaces.
Safe operating procedures, child safety, speed limits, and avoiding tip-overs.
Guidelines for responsible operators, avoiding drugs/alcohol, and wearing appropriate safety gear.
Avoiding rotating parts, pinch points, hot surfaces, entanglement, thrown objects, and exhaust fumes.
Required tools and a list of items included in the assembly package.
Step-by-step instructions for assembling the handlebar, discharge chute, and controls.
Instructions for connecting speed selector, drive belts, and clutch controls.
Procedures for checking gearcase oil, fuel, and control functions before operation.
Description of traction drive clutch, attachment clutch, ignition switch, primer bulb, and choke.
Diagram illustrating the locations of various controls and features on the unit.
Detailed explanation of traction drive clutch, attachment clutch, and ignition switch functions.
How to use the primer bulb for starting and the choke control for engine operation.
A visual guide identifying all controls and features by number and name.
How to use the throttle for engine speed and the speed selector for unit movement.
Operating and adjusting the discharge chute and deflector for snow throwing.
Adjusting scraper blade, runners, and checking for a frozen impeller before starting.
Ensuring proper fuel, checking crankcase oil, runners, and clutch function before operation.
Safety precautions for servicing, fueling procedures, and operating the fuel shut-off valve.
Maintaining proper engine cooling through air circulation and cleaning fins.
How to check and change the engine crankcase oil, including oil type recommendations.
Critical adjustments for the attachment drive belt, including brake engagement and belt fingers.
Steps for replacing attachment and traction drive belts, and adjusting related components.
Information on shear bolt replacement, tire pressure, and friction wheel replacement.
Detailed steps for removing and installing the friction wheel assembly.
Importance of auger gearcase lubricant level and checking for leaks.
How to add lubricant to the auger gearcase and the type of lube to use.
Locations for lubrication, types of grease, and greasing the auger shaft.
Adjusting the discharge chute and deflector for proper snow direction and tension.
Adjusting runners for ground clearance and the scraper blade for wear compensation.
Procedures to check the impeller brake engagement and clearance.
Detailed steps for adjusting the attachment clutch lever and idler pulley.
Adjusting the traction drive clutch to compensate for friction wheel wear.
How to adjust the speed selector rod and position for proper speed control.
Guidelines for cleaning the unit, proper storage, and protecting against rust.
Instructions for engine storage, including draining fuel, for extended periods.
Chart detailing recommended maintenance tasks and common problems with solutions.
Detailed specifications for the Sno-Thro model, including dimensions, power, and drive system.
Details on the 5-year limited warranty, coverage, exclusions, and obtaining service.
General| Type | Two-Stage |
|---|---|
| Engine | Ariens AX 208cc |
| Auger Material | Steel |
| Clearing Width | 24 inches |
| Speeds | 6 forward, 2 reverse |
| Impeller Diameter | 12 in |
| Throwing Distance | Up to 40 feet |
To Next Page