2 Ariens® 932 Sno-Thro® Orig. 6/99
PRODUCT REGISTRATION
A warranty registration card must be filled out, signed,
and returned at time of sale. This form activates the
warranty. The replacement of any part on this vehicle with
anything other than authorized replacement part may
adversely affect the performance, durability, or safety of
this unit and may void the warranty. Claims meeting
requirements during limited warranty period will be
honored.
To guarantee full warranty service, make sure your
registration card has been returned.
DELIVERY
Customer Note: Your unit should be ready to run when
you take delivery. Your retailer is required to review
important information in this manual with you before or
upon delivery of the unit or attachment.
Retailer should:
1. Check to make sure all Assembly has been properly
completed.
2. Fill out Original Purchaser Registration Card and
return the card to Ariens Company.
3. Explain Limited Warranty Policy.
4. Explain recommended lubrication and maintenance.
Advise customer on adjustments.
5. Instruct customer on controls and operation of unit.
Discuss and emphasize the Safety Precautions.
Give customer Product Manuals. Advise customer to
thoroughly read and understand them.
DISCLAIMER
Ariens Company is hereinafter referred to as Ariens.
Ariens reserves the right to discontinue, make changes
to, and add improvements upon its products at any time
without public notice or obligation. Ariens disclaims
liability for any claims or damages, whether regarding
property, personal injury or death arising out of the use of
unauthorized replacement parts.
The descriptions and specifications contained in this
manual were in effect at printing. Equipment described
within this manual may not be identified as either
standard or optional. Illustrations may not be applicable
to your unit.
THE MANUAL
Before operation of unit, carefully and completely read
your manuals. The contents will provide you with an
understanding of safety instructions and controls during
normal operation and maintenance.
All reference to left, right, front, or rear are given from
operator standing in operation position and facing the
direction of forward travel.
SERVICE AND REPLACEMENT PARTS
When ordering replacement parts, publications, or
making service inquiries, know the Model and Serial
numbers of your unit, engine, clutch, etc.
Unit numbers are located on the product registration form
in the unit literature package. They are
printed on a serial number label, located
on the frame of your unit (Figure 2).
Record applicable model and serial
numbers here:
Unit
Engine
PUBLICATION & SERVICE PART LIST
Order the Following parts through your Dealer:
Part No. Qty. Description
03238500 1 Parts Manual
21526500 1 Spark Plug
07210700 1 Impeller Belt
07210700 1 Traction (Transmission) Belt
53200500 2 Shear Bolts
Mail Requests to:
Ariens Company 655 West Ryan Street P.O. Box 157
Brillion, WI, USA 54110-0157
Transfer
model & serial
number
label from
product
registration
here.
SECTION 1: INTRODUCTION
Figure 1
Serial Number Label
OS0520
To Next Page
Loading...
Need help?
General
