Need help?Do you have a question about the Ariens SNO-THRO 924318-ST824 and is the answer not in the manual?
General| Clearing Width | 24 inches |
|---|---|
| Intake Height | 20 inches |
| Drive System | Disc-O-Matic |
| Auger Material | Steel |
| Chute Control | Remote |
| Speed Settings | 6 Forward / 2 Reverse |
| Tire Type | Directional Snow Tread |
| Headlight | Yes |
| Throw Distance | Up to 40 ft |
| Starting System | Electric start |
| Tire Size | 15 x 5 inches |
| Skid Shoes | Adjustable |
| Warranty | 3 Year Limited Consumer |
| Auger Type | Steel Serrated |
Explains operation of clutch levers, ignition, primer, choke, throttle.
Covers recoil starter, speed selector, and chute deflector remote.
Details on the manual, service, and parts ordering.
Steps for warranty registration and dealer handover.
Ariens' policy on changes and liability.
Explains safety alert symbols, signal words, and decal locations.
Guidelines for safe working, laws, and operator training.
Notes on reference information and important procedures.
Rules for operation, area clearing, speed, visibility, and personal safety.
Covers hot surfaces, fuel, slopes, storage, and battery precautions.
Explains operation of clutch levers, ignition, primer, choke, throttle.
Covers electric starter, speed selector, and recoil starter.
How to operate the discharge chute deflector and remote.
Operation of discharge chute, crank, differential lock, runners, and headlight.
Steps before starting engine, including checking impeller and fuel.
Detailed steps for electric and manual start, and engine shutdown.
Guidance on clearing snow effectively and safely.
Positioning unit for service and safely filling the fuel tank.
Importance and operation of the fuel shut-off valve.
Covers engine cooling, oil checks, and muffler guard.
Procedures for replacing traction and attachment drive belts.
Shear bolt replacement, auger gearcase, tire pressure, and friction wheel.
Locations for lubrication and battery care and safety.
Adjusting chute deflector, remote, runners, scraper blade, and chute crank.
Adjusting attachment clutch, traction clutch, speed selector, and drive chain.
Guidelines for transporting and storing the unit.
Recommended maintenance intervals and problem solutions.
To Next Page