Ariens SNO-THRO 938016 - 522

Questions and Answers

B
Brittany LeeJul 30, 2025
How to fix Ariens Snow Blower that will not start?
- A
  Adam Lee DVMJul 30, 2025
  If the engine of your Ariens Snow Blower won't start, first ensure that the ignition switch is in the "RUN" position by turning the key to that position. Another reason could be that the fuel tank is empty. If this is the case, fill the tank with properly mixed fuel and prime the engine, setting the choke for an easier start. For engine ignition problems, consult the Engine Manual. For bad starter or wire connection, check connections and see your Dealer.
J
Jennifer ThompsonAug 5, 2025
What to do if my Ariens Snow Blower engine will not crank?
- D
  destinybrownAug 5, 2025
  If your Ariens Snow Blower engine will not crank, make sure the ignition switch is in the "RUN" position. Turn the key to the "RUN" position. If that's not the issue, there may be a bad starter or wire connection, so check the connections and see your Dealer. An electrical problem might also be the reason. Check the wiring for wear, damage, or poor connections and consult your Dealer.
J
Jennifer MitchellAug 11, 2025
Why does my Ariens Snow Blower engine keep stopping?
- G
  Gary DayAug 11, 2025
  If your Ariens Snow Blower's engine stops, it might be due to improperly mixed or contaminated fuel. In this case, use only clean, properly mixed fuel. If necessary, drain the tank and refill it with a new fuel mixture. Another possible reason is no spark, so check the spark plug and connecting wire.
J
John SotoAug 17, 2025
Why is the auger on my Ariens SNO-THRO 938016 - 522 not turning or throwing snow?
- S
  sdiazAug 17, 2025
  If the auger of your Ariens Snow Blower will not turn or throw snow, it could be frozen in place. Move the unit to a warm area to thaw it. Alternatively, ice or debris might be obstructing the auger. With the engine off and the auger disengaged, check for obstructions and remove them. Also, the auger control cable could be out of adjustment, so adjust the cable. If the drive belt is slipping or the idler is out of adjustment, adjust the idler.
K
Kevin GutierrezAug 22, 2025
What to do if the discharge chute on my Ariens Snow Blower will not turn?
- N
  Nancy DavisAug 23, 2025
  If the discharge chute on your Ariens Snow Blower will not turn, it is possible that the chute gears are frozen. Move the unit to a warm area to allow them to thaw.

Summary

SAFETY

Safety Alerts and Guidelines

Explains safety alert symbols, general practices, and operator training requirements.

Specific Danger Warnings

Details critical safety warnings for operating the unit, including rotating parts and engine hazards.

Safety Rules for Operation and Handling

Covers pre-operation checks, safe unit operation, handling, slope operation, and child/personal safety.

Safety for Service, Storage, and Transport

Outlines safety precautions for service, cleaning, fuel handling, and unit storage/transport.

ASSEMBLY

Unit Assembly Steps

Details steps for assembling the handlebars and discharge chute, including tools and carton removal.

OPERATION

Controls and Features Overview

Explains the function and operation of key controls like ignition, auger clutch, primer, choke, and starter.

Auger, Chute, and Operation Safety

Covers auger operation, discharge chute use, and essential safety warnings during operation.

PRE-START CHECKS AND OPERATION DETAILS

Pre-Start Checks and Emergency Stopping

Outlines crucial pre-start checks for safe operation and procedures for stopping in an emergency.

Adjusting Operation Components

Details how to adjust the discharge chute deflector, handlebars, and scraper blade.

STARTING AND SHUTOFF

Manual and Electric Start Procedures

Details manual and optional electric start processes, and engine shutoff procedures.

OPERATIONAL PROCEDURES

Snow Throwing, Unit Movement, and Fueling

Covers throwing snow, moving the unit, fueling precautions, and transport safety.

MAINTENANCE

Maintenance Schedule and General Procedures

Provides a maintenance schedule, general recommendations, and safety for service and cleaning.

SERVICE AND ADJUSTMENTS

Service Preparation and Belt Adjustments

Covers service safety, chute adjustment, drive belt replacement, and belt finger adjustment.

AUGER AND IDLER ADJUSTMENTS

Auger Control Cable and Idler Position Adjustment

Details procedures for adjusting the auger control cable and the idler position.

STORAGE AND TROUBLESHOOTING

Unit Storage and Engine Preparation

Provides guidance on safe unit and engine storage, including fuel management.

Troubleshooting Common Issues

Lists common problems with starting, engine, auger, and chute, with their respective corrections.

SPECIFICATIONS AND PARTS

Technical Specifications and Model Details

Lists technical specifications for different models, including power, dimensions, and speeds.

Optional Accessories and Service Parts

Lists available optional accessories and genuine Ariens service parts for the unit.

LIMITED WARRANTY

2 Year Limited Warranty Details

Outlines warranty conditions, limitations, exclusions, remedies, and disclaimers for the main product.

AUGER WARRANTY

DURA-CLEANT Auger Lifetime Warranty

Explains the lifetime warranty for auger rubber components, including usage requirements and exclusions.

Ariens SNO-THRO 938016 - 522 Specifications

General

Engine Type	4-Cycle
Drive Type	Wheel Drive
Chassis	Steel
Auger Material	Steel
Tire Size (in)	13 x 4
Engine	Ariens AX
Speeds	6 Forward / 2 Reverse
Starting System	Recoil
Throw Distance (ft)	40
Chute Control	Crank