pg 5
9. Connect the appliance to the power source. The rst
indicator (the default grinding time setting) will light up at
100% brightness while the other indicators and the indicator
of Start/Stop button light up at 50% brightness. Select your
desired grinding time based on your needs. Press the Start/
Stop button. The appliance will begin to grind your coee
beans. The coee powder will dispense the ground coee
beans from the coee powder outlet into the Ground Coee
Container. The indicator Start/Stop button keeps blinking
during grinding process. NOTE: The appliance will enter into
a sleep state if no operation is selected within 90 seconds of it
being plugged in.
10. When the desired grinding time has been reached, the
coee grinder will stop working automatically and go back
to standby mode, at that time, the rst indicator (the default
grinding time setting) lights at 100% brightness while the
other indicators and the indicator of Start/Stop button light
at 50% brightness. NOTE: The maximum amount of ground
coee in container is 155g.
11. Remove the ground coee container from its holder, remove
lid and pour out the ground coee. NOTE: The container is
very tight. Li and tilt the bottom out rst to remove.
12. Unplug the appliance.
NOTE: The appliance must rest for 30 minutes if operated for
5 minutes continuously. It is suggested that you operate this
appliance for less than 90 seconds at a time with a minimum 90
seconds rest time between cycles.
You may stop the appliance from running at any time during
the grinding process, by pressing the Start/Stop button.
To Next Page
Loading...