Need help?Do you have a question about the Arista DCS-7260CX-64 and is the answer not in the manual?
Outlines the sequential steps required for the proper installation of the switch.
Directs users to external safety documentation for essential compliance and handling procedures.
Criteria for choosing a suitable installation location, considering ventilation and accessibility.
Lists necessary tools and components required for the switch installation process.
Guidelines to prevent damage from static electricity during switch handling and installation.
Instructions for mounting the switch into a two-post equipment rack.
Steps to securely attach the mounting brackets to the switch chassis.
Procedure for placing and securing the switch into the rack after bracket attachment.
Overview of the process for mounting the switch into a four-post equipment rack.
Steps to attach mounting brackets to the switch chassis for four-post rack installation.
Steps to manually configure the switch, bypassing Zero Touch Provisioning (ZTP) mode.
Detailed procedures for initial switch configuration, including IP addressing and default routes.
General| Model | DCS-7260CX-64 |
|---|---|
| Product Series | 7260CX |
| RAM | 16 GB |
| Flash Storage | 16 GB |
| Operating System | Arista EOS |
| Form Factor | 1U |
| Latency | < 1 µs |
| CPU | Intel x86 |
| Power Supply | Dual Redundant Hot-Swappable |
| Operating Temperature | 0°C to 40°C |
| Dimensions | 17.3" (43.9 cm) W |
| Cooling | Front-to-rear |
To Next Page