3
CONSTRUCTION FEATURES
The product is designed to ensure maximum energy saving without compromising final user comfort: the promise is to deliver
domestic hot water regardless the external conditions. Therefore the heat pump group preferably works without the electric
group aid; the heating resistance is switched on only when strictly necessary in order to reach the desired set point temperature
in time; the main board controls the heat pump and resistance state and determines when they shall be
switched on or off. The split configuration ensures space saving and noise isolation; moreover its layout avoids cooling
effect, ventilation constraints and permeability problems.
Internal unit construction features
MODEL 80 L MODEL 100 L MODEL 110 L
A 860 1002 1085
B Outlet hot water 1/2” pipe
C Inlet hot water 1/2” pipe
D Inlet gas pipe 3/8 “
E Outlet gas pipe 1/4 “
F Gas connections housing cover
G Electrical connections, electronic boards and heating element housing
H Serial port housing
I Condenser
J Interface board
K Wall bracket
To Next Page
Loading...
Need help?
General
