39 / EN
WI-FI FUNCTION
Aqua Ariston NET confi guration
For further information about Wi-Fi confi guration and the product registration procedure, refer to the enclosed
quick start guide.
Creating an account
1. Download and install the app on your cellphone (the name of the app is given in the quick start guide)
2. Launch the app, click on REGISTRATION, and fi ll in all fi elds.
3. You will receive a confi rmation email. Click on the link included in the email to activate your account.
The username is the same as your email address.
Wi-fi confi guration and product registration
1. Press the Wi-Fi button. The “ ” lamp starts fl ashing slowly (fi g.10)
2. Hold the Wi-FI button down for 5 seconds: the “
” lamp will start fl ashing quickly and the display will
show the symbol “
” (Fig. 11)
3. Launch the app and follow the guided procedure
4. If the connection is successful:
- the symbol “
” appears on the display
- the “
” lamp remains steady on
- the app displays a message to confi rm registration
if the connection fails, check everything carefully and repeat the procedure from the start.
Note: the password may not contain Chinese characters. Change them if any are present.
App layout
The following instructions are included (Fig. 25)
•
ON/OFF
(J)
• Manual, Night and Programming modes (L)
• Button displaying the number of showers (N), this can be selected or removed by touching it lightly
• Communications status indicator (O)
• Energy saving button (R)
• Remaining time (S)
• Current water temperature (T)
Scroll to the right to display other pages.
Connection status description
Button
On The Wi-Fi is connected to the home network
Slow fl ashing
The Wi-Fi module is attempting to connect to the home net-
work, or the connection has failed
Rapid fl ashing The Wi-Fi module is active
O The Wi-Fi module is o
Symbol
On
The Wi-Fi is already active and can be connected to the home
network.
Symbol
On
Correctly confi gured and connected to the internet and
Cloud
To Next Page
Loading...
