To Next PageTo Next Page
Need help?Do you have a question about the Ariston GL 4 and is the answer not in the manual?
General| Brand | Ariston |
|---|---|
| Model | GL 4 |
| Category | Water Heater |
| Language | English |
Essential safety guidelines for operating the water heater, covering electrical, operational, and maintenance safety.
Key technical specifications for GL 2.5, GL 4, and GL 6+ models, including capacity, voltage, and power.
Warning to installers regarding manual review and placement for the owner's benefit.
Important cautions regarding thermostat settings, hydrogen gas production, and potential damage from leaks.
Detailed steps for installing the GL 6+ model, including mounting, wiring, and water connections.
Securely fasten the mounting bracket and hang the heater for vertical installation.
Guidance on placing the heater on the floor and confirming piping orientation.
Instructions for electrical wiring, grounding, and circuit requirements for the GL 6+ model.
Connecting cold water inlet and hot water outlet pipes for the GL 6+ model.
Steps for installing GL 2.5 and GL 4 models, focusing on wall mounting under the sink.
Instructions for fastening the mounting bracket and hanging the heater for GL 2.5/4 models.
Guidance for placing the GL 2.5 and GL 4 heaters on the floor.
Connecting water pipes for the GL 2.5 and GL 4 models.
Caution regarding the installation and requirements of the temperature and pressure relief valve.
Addressing thermal expansion issues in closed water systems and recommendations for prevention.
Procedure for filling the tank, checking for leaks, and initiating the heating cycle.
How to adjust the water temperature using the thermostat control.
General guidelines for periodic maintenance tasks, requiring power shutoff and cover removal.
Methods for draining water from the heater for maintenance or servicing.
Step-by-step instructions for safely removing the heating element.
Methods for removing scale deposits from the heating element to maintain efficiency.
Procedure for replacing the anode rod to protect the tank from corrosion.
Instructions for installing a new heating element after removal.
Guide for replacing the thermostat unit in the water heater.
Procedure for resetting the high temperature limit shut-off device.
Diagnosing and resolving issues where the water is not heating properly.
Troubleshooting steps if the indicator light is not functioning.
Identifying and fixing the cause of brown or rusty water.
Addressing potential causes of unusual odors in the water.
Steps to lower excessively hot water temperatures.
Resolving issues where the water temperature is insufficient.
Checking for and addressing leaks from fittings or the element gasket.
Details on what the warranty covers, including the inner tank and component parts.
Specifies the duration of coverage for the inner tank and other component parts.
Lists conditions and circumstances that are not covered by the limited warranty.
Steps for owners to follow when seeking warranty service or making a claim.
