17
GB
ServiceTroubleshootingPrecautions CareProgrammes DetergentsInstallation Description
Display
In addition to being a practical tool to programme your appliance (see page 19), the display provides useful
information concerning the wash cycle and status.
Once you have pressed the START/RESET button to start
the programme, the display will indicate the amount of
time left until the end of the wash cycle. If a delayed start
has been set (using the Delay Timer, see page 19), the
delay time will be indicated on the display.
The following information is displayed during the wash
cycle:
Cycle phase under way:
Pre-wash Spin cycle
Wash cycle
Rinse
Customised functions and options:
To select functions and options, see below and on page 19.
Buzzer : Your washing machine comes with a
buzzer, which will inform you of the various functions
being carried out, or of any malfunctions: incompatibility,
Keyboard lock:
For your safety and that of your children, you can block all the keys during the machine's operation or during
waiting position (delayed start - Stand-by) by pressing the function key for 2 seconds.
To disable this function, hold the same button down for 4 seconds.
ON-OFF/Lid lock:
If this icon is on, the appliance door is locked to prevent it from being opened accidentally; to avoid any damages,
wait for the icon is off before you open the appliance door.
When the programme has ended, the word End will light up.
In the event of an anomaly, an error code will appear, such as: F-01, (see page 24).
Downloaded From WashingMachine-Manual.com Manuals
To Next Page
Loading...
