Need help?Do you have a question about the Ariston CD12TUK and is the answer not in the manual?
General| Brand | Ariston |
|---|---|
| Model | CD12TUK |
| Category | Washer/Dryer |
| Language | English |
Important safety precautions for installation and operation.
Tips for maintaining efficiency and safety.
Selects one of the 18 wash programmes.
Sets the wash temperature for the selected programme.
Selects the appropriate drying cycle for fabrics.
Compartments for prewash detergent, wash detergent, and softener.
Interrupts cycle, leaving laundry soaking before spin.
Reduces spinning speed to 600 rpm.
Excludes the spin cycle for easier ironing.
Reduces water consumption during rinse cycles for small loads.
Turns the washer-dryer on and off.
Indicates when the door is locked.
Indicates when the machine is powered on.
Shows the selected programme and its stages.
Tips for sorting, checking labels, and loading laundry.
Advice on loading for optimal balance and performance.
How to use the detergent dispenser and types of detergent.
Instructions for the initial run of the appliance.
How to select programmes using the control knobs.
What to do after the wash cycle completes.
Instructions for using the drying function.
Recommended maximum load weights for drying.
How to select programmes for combined wash and dry cycles.
Items to avoid drying and specific warnings.
Guide to programmes based on fabric type and dirt level.
Programmes for heavy fabrics like sheets and towels.
Programmes for synthetic fabrics like underwear.
Programmes for delicate items like wool.
Methods for removing common and difficult stains.
Specific pre-treatment steps for ink, tar, wax, etc.
Items that should not be washed or dried.
Tips for washing curtains to prevent creasing.
Guidance on washing specific bulky items.
Maximum load weights for different fabric types.
Tips for reducing water and energy consumption.
Routine care for the appliance after each wash.
Instructions for securing the machine when moving.
How to clean the exterior, dispenser, and service parts.
Procedure for removing limescale buildup.
Common problems like not starting, filling, or drying.
Troubleshooting drainage, pumping, and vibration.
Addressing suds formation and water leaks.
Steps to take after unpacking the appliance.
Ensuring the machine is level for proper operation.
Instructions for connecting the drain hose.
Connecting inlet hoses for hot and cold water.
How to replace fuses and obtain correct covers.
Procedures for removing or re-routing the mains cable.
Guide for connecting to a different plug.
Safety guidelines for disposing of the plug and appliance.
Attaching hinges and magnetic plate to the door.
Attaching the prepared door panel to the appliance.
Placing the machine into its cabinet space.
How to use the template for drilling holes.
Attaching door panel parts and machine.
Inserting machine into cabinet and leveling feet.
Details on programmes compliant with IEC standards.
To Next Page