USER’S MANUAL
/ 7
Auto button - Temperature adjustment activation
The AUTO function enables boiler operation to be adapted
to environmental conditions and to the type of system it is
installed on.
Comfortable temperature is reached inside the room in the
quickest way possible, without wasting money, energy or
efciency, while substantially reducing the amount of wear
experienced by the components.
Your installer will advise you on the devices
connectable to the boiler and will program it
according to the system.
In normal boilers the water temperature inside the heating
elements is usually set to a high value (70-80°C), thereby
ensuring effective heating during the few really cold winter
days. It then becomes excessive on less cold days (of which
there are many) more typical of the autumn and winter
seasons. This leads to excessive room heating after the
thermostat has been switched off, resulting in energy waste
and uncomfortable conditions inside the room.
The AUTO function “takes control” of the boiler and selects
the best operating regime based on environmental conditions,
external devices connected to the boiler and the performance
required. It constantly decides at which power level to
operate based on the environmental conditions and the room
temperature required.
To Next Page
Loading...
