Need help?Do you have a question about the Ariston CLAS ONE R 24 and is the answer not in the manual?
Responsibilities for correct installation, commissioning, and servicing.
Instructions and advice for qualified installers regarding the appliance.
Information on Ariston's after-sales service and contact details.
Details on the manufacturer's warranty and its conditions.
Essential safety warnings and guidelines for installation and use.
Guarantees that the appliance conforms to relevant EU directives.
Explanation of symbols and their meanings found on the boiler's data plate.
Specific safety rules and warnings related to installation and work procedures.
Guidelines on personal protective equipment and safe working practices.
Details of the boiler's control panel, buttons, display, and indicators.
Explains the overall view of the boiler and its physical dimensions.
Specifies required minimum clearances around the boiler for installation.
Lists applicable national and British standards for installation.
Guidelines for flue termination, spacing, and room ventilation.
Requirements for gas and electrical connections, including safety and pipework.
Details on automatic bypass, feed/vent pipework, pump, and draining taps.
Procedures for system flushing and recommended water treatment.
Guidelines for boiler location and compatibility with external system controls.
Various methods for safely discharging condensate from the boiler.
Steps for physically installing the boiler and making the gas connection.
Procedures for filling the heating system and checking for leaks.
How to connect the central heating flow and return pipes.
Instructions for safely opening the boiler's outer casing for inspection.
Visual representation of the boiler's internal water flow paths.
General requirements for flue termination and acceptable spacing.
Detailed instructions for installing a 60/100mm horizontal coaxial flue.
Instructions for installing an 80/125mm horizontal or vertical flue.
Instructions for installing a 60/100mm vertical coaxial flue.
Instructions for installing an 80/80mm twin pipe flue system.
Specific rules for siting twin flue air intake and exhaust terminals.
Table specifying maximum extension lengths for different flue types.
Details on accessing the connection unit and power supply requirements.
Wiring diagram showing connections to the main PCB.
Diagram showing wiring for an S Plan system with external programmer.
Steps before commissioning, including electrical and gas safety checks.
Verification of gas supply integrity and system filling/water treatment.
A step-by-step checklist for the initial start-up and operation of the boiler.
Detailed steps for initiating the boiler's first ignition and basic checks.
Steps for performing combustion analysis and preparing measuring equipment.
Procedure for adjusting the gas valve for optimal CO2 at maximum output.
Procedure for checking and adjusting CO2 at minimum gas flow.
Final steps to complete adjustments, check for leaks, and refit panels.
Procedures for setting gas types and converting the appliance for LPG.
Explanation and setup of the automatic boiler control function.
Description of internal checks and safety shut-off procedures.
Table detailing error codes, their display, and descriptions.
How the anti-frost feature operates to prevent freezing.
How to access and navigate the boiler's setting menus.
Step-by-step example of accessing specific boiler parameters.
Configuration of general boiler settings like ignition and thermoregulation.
Settings related to maximum heating power and water heating percentages.
Settings for post-ventilation, pump speed, and external temperature correction.
Configuration options for domestic hot water flow delay and post-circulation.
Setting fixed temperatures and appliance value for Zone 1.
Configuration of heating control type, slope, parallel shift, and compensation for Zone 1.
Setting maximum heating temperature for Zone 1 based on parameter 420.
Setting fixed temperatures and appliance value for Zone 2.
Configuration of heating control type, slope, parallel shift, and compensation for Zone 2.
Setting fixed temperatures and appliance value for Zone 3.
Accessing boiler operating statistics and checking fan status.
Monitoring boiler temperatures and solar storage input.
Setting maintenance reminders and accessing the error list.
Emphasizes maintenance importance and lists general inspection points.
Steps for testing the boiler post-maintenance and draining the system.
Instructions for cleaning the condensate trap and using anti-freeze.
Steps to safely disconnect the boiler from power and gas supplies.
Procedures for removing front panels to gain access to internal parts.
Steps to access the boiler's electrical control box.
Procedures for replacing the fuse and servicing the main and display PCBs.
Maintenance of the condensate trap and temperature sensors.
Steps for draining the boiler, removing the silencer, and accessing the gas pipe and burner unit.
Steps for disconnecting gas pipes, return pipes, and condensate pipes.
Final steps for removing the main heat exchanger and its associated pipes.
Identification of the main parts of the burner unit.
Procedure for unplugging and removing the electrode assembly.
Steps for draining the boiler and removing the silencer for burner access.
Procedures for removing the burner unit, ceramic fibre, and burner gasket.
Steps for removing the fan, venturi, and gasket.
Procedure for disconnecting and removing the gas valve.
Overview of annual checks for ignition electrode, burner, fan, heat exchanger, and trap.
General information, power outputs, and efficiency ratings of the boiler.
Details on emissions, heating pressure, and temperature ranges.
Electrical specifications, ambient temperature limits, and protection levels.
Energy performance data according to EU regulations (ErP Directive).
Key performance indicators and energy efficiency classes from the product fiche.
Instructions for filling out energy labels for packaged heating systems.
Further explanation of calculations for seasonal space heating and water heating efficiency.
Formulas and methods for calculating seasonal space heating energy efficiency.
Formulas and methods for calculating water heating energy efficiency.
Verification of system installation, cleaning, and control device setup.
Recording of operating parameters for heating and hot water modes.
Checks specific to condensing boilers and final demonstration to the customer.
Guidance on regular servicing and completing service records.
Forms for recording details of maintenance services performed on the boiler.
To Next Page
General