Ariston DEOS 10 - Control Panel Overview; Indicator Lights; Control Pad Functions

GB
24 /
CONTROL PANEL
Indicator lights
1. BUCKET FULL INDICATOR LIGHT
2. AUTO DEFROST INDICATOR LIGHT
3. CONTINUOUS OPERATION ON INDICATOR LIGHT
• When the CONTINUOUS MODE indicator light is lit, the appliance operates at the maximum dehumidication level
until the tank lls up. In this mode, the humidity control buttons ‘+’ and ‘-’ are not enabled.
4. 40% humidity level setted mode operation on indicator light
5. 50% humidity level setted mode operation on indicator light
6. 60% humidity level setted mode operation on indicator light
Control pads
7. MODE PAD
Press to select the operation mode: continuously dehumidication 40% humidity level 50% humidity level 60% hu-
midity level continuously dehumidication.
8. ON/OFF INDICATOR LIGHT
Press to turn the dehumidier on and o.
ANTI-FROST FUNCTION
Prevents the evaporator from frosting, thereby extending the dehumidier’s life and enhancing energy saving.
When auto defrost is operation on, the indicator light illuminates.
The indicator light ashes at 5Hz under room temperature sensor error or evaporator temperature sensor error.
NOTE: If the auto defrost indicator light ashes, unplug the unit and plug it back in. If error repeats, call for service.
IMPORTANT: When the compressor stops, it is necessary to wait 3 minutes before it restarts.
CAUTION
Do not touch the selector with wet hands (risk of personal injury due to electrocution).
Do not start or stop the appliance by simply plugging it into the power socket or unplugging it (risk of personal injury
due to electrocution).
Avoid prolonged direct exposure to the air ow (risk of personal injury due to sensitisation of the skin).