EasyManua.ls Logo

Ariston EP 30 R 3 KW

Ariston EP 30 R 3 KW
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Unvented water heater
Question and Answer IconNeed help?

Do you have a question about the Ariston EP 30 R 3 KW and is the answer not in the manual?

Ariston EP 30 R 3 KW Specifications

General IconGeneral
TypeElectric Water Heater
Capacity30 liters
Power3 kW
Voltage230 V
Frequency50 Hz
ThermostatAdjustable
MaterialStainless steel
Safety FeaturesThermal Cut-out, Pressure Relief Valve
Heating TimeApproximately 1 hour

Summary

Product Description

Technical Specifications

User Guidance

Regulatory Compliance

Water Regulations and Byelaws

Outlines regulations ensuring wholesome water supply and approved materials.

Building Regulations

Details statutory requirements for unvented hot water systems, notifying authorities.

Delivery Information

Heater Functionality

How the Heater Works

Explains thermostat, thermal cut-out, magnesium anode, and water heating mechanism.

Installation and Setup

Siting and Fixing

Guidance on positioning, wall bracket installation, and clearance for servicing.

Plumbing and Connections

Details cold water supply, pressure requirements, and pipework for expansion.

Expansion Control Systems

Explains using expansion vessels and non-return valves for managing water expansion.

Discharge Pipework Guidelines

Guidelines for safe and compliant discharge pipe installation from relief valves.

Electrical Requirements

Requirements for mains supply, earthing, cable types, and connection methods.

Commissioning and Maintenance

Commissioning Procedures

Steps to check components, connections, water flow, and demonstrate operation to the user.

User Maintenance Advice

Recommends annual inspection of the sacrificial anode and descaling for optimal performance.

Installer Maintenance Tasks

Instructions for installers regarding electrical safety, anode access, and draining the heater.

Troubleshooting Guide

Valve Dripping Issues

Diagnoses causes for pressure/temperature relief valves dripping, including thermostat/cut-out failure or high mains pressure.

Water Heating Problems

Addresses issues like no hot water due to thermal cut-out or burnt element, and milky water from limescale/oxygenation.

Related product manuals