Need help?Do you have a question about the Ariston Nuos Evo Split 110 and is the answer not in the manual?
General| Type | Heat Pump Water Heater |
|---|---|
| Capacity | 110 liters |
| Energy Efficiency Class | A+ |
| Refrigerant | R134a |
| Electric Heater Power | 1.5 kW |
| Thermal Insulation | Polyurethane Foam |
| Temperature Control | Electronic |
| Power Supply | 220-240V |
| Installation | Indoor / Outdoor |
| Heating Element | Electric |
| Protection | IP24 |
| Operating Temperature Range (Air) | -7°C to +43°C |
Describes how the heat pump water heater works and the concept of COP.
Emphasizes need for qualified personnel and general safety rules for installation.
Lists specific safety rules and associated risks during installation.
Continues listing safety rules and risks for installation tasks.
Details criteria for selecting appropriate locations for internal and external units.
Explains how to manage condensate and connect the power supply.
Covers the steps for connecting refrigerant lines and tools required.
Details how to prepare copper pipes for refrigerant line connections.
Explains the process of connecting refrigerant lines to both units.
Details the process for charging the system with refrigerant.
Explains water connections, safety valve fitting, and system requirements.
Describes the procedure for filling the water heater and its first power-on.
Lists error codes, their causes, and recommended actions for troubleshooting.
Provides solutions for common problems like cold water or boiling water.
To Next Page