Need help?Do you have a question about the Ariston PRIMO HE ITI 300 and is the answer not in the manual?
General| Capacity | 300 liters |
|---|---|
| Heat Source | Electric |
| Power Supply | 230 V |
| Maximum Pressure | 8 bar |
| Energy Efficiency Class | C |
| Water Connections | 3/4" |
Explains the function of immersion heaters, thermostats, and thermal cut-outs in regulating water temperature.
Guidelines for cylinder placement, floor loading, access for maintenance, and ensuring vertical installation.
Specifies pipework sizes (22mm, 28mm), isolation valve installation, and flushing procedures to protect control valves.
Critical safety instructions for sizing, routing, and terminating discharge pipes from relief valves to prevent hazards.
Instructions for electrical installation, focusing on the ProTech anti-corrosion system and its required power supply.
Provides wiring diagrams for single and dual element immersion heaters, including connections for direct and Economy 7 systems.
To Next Page