Ariston Sensys Net User Manual

42 /GB
4.3 Installation of gateway on the boiler
WARNING!
Before applying the double-sided tape,
you should clean the surface thoroughly
with solvent and dry it thoroughly.
1. Stick the double-sided tape to the back
of the support plate (Figure 7); remove
the protective film and attach to the
boiler;
2. Attach to the plate, pressing along the
sides (Figure 8);
3. Attach the cover, pushing gently (Figure
9).
NOTE:
In order to avoid interference problems,
use a shielded cable or twisted pair cable.
The following versions of the Ariston
Sensys software are not compatible with
Ariston Net:
- 01.00.00
- 01.00.04
If this is the case, replace the existing
Sensys with the one supplied in the
Ariston Net kit.
7
8
9

Ariston Sensys Net Specifications

General

Brand	Ariston
Model	Sensys Net
Category	Control Unit
Language	English