Ariston Sensys Net User Manual

GB / 43
WEBBUS A.P. WEBBUS A.P.
5. CONNECTING TO THE INTERNET WITH THE APP OR WEB BROWSER
After installing the product, switch on the heating system. The
gateway switch on as it is powered by the BridgeNet BUS.
1. For several moments, the gateway performs its startup proce-
dure, during which all the LEDs flash red in sequenc .
2. After a few seconds, the BUS LED turns green and the WEB LED
stays fi ed red. The device is now awaiting configuration and
the Sensys displays the icon “ ”
5.1 WIFiconguration
Before running the gateway Wi-Fi configuration procedure, download the Ariston Net
app from the app Stores and check that the ADSL router is working correctly.
WARNING! Ariston Net supports the following encryption for Wi-Fi networks: WEP,
WPA/WPA2 Personal
5.1.1 Conguration using Sensys
1. Press the OK button to access the Menu. Turn the knob and select the "Connectivity
settings" menu. Press OK.
2. Check that Ariston Net is available in your country and if it is, press OK.
3. Turn the knob to select “Network configuration with AP . Press OK.
5. After at most 40 seconds, Sensys displays the AP icon (steady) and the gateway cre-
ates a new Wi-Fi network that remains active for 10 minutes, after which you will need
to repeat the procedure.

Ariston Sensys Net Specifications

General

Brand	Ariston
Model	Sensys Net
Category	Control Unit
Language	English