21
GB
REPLACING THE BATTERIES
The remote control is powered by two
type AAA (1.5V) batteries, housed in the
rear compartment closed with a cover.
Replace the batteries as follows:
1. Remove the cover.
2. Remove the dead batteries and insert
new batteries taking care to the re-
spect the polarity (+) and (-).
3. Close the slot by inserting the cover in
the relevant housing.
NOTE:
Removing the batteries may cause the
loss of the initial settings.
WARNINGS:
- Do not mix dead and new batteries
or batteries of different brands.
- Do not leave the batteries inside
the remote control if you do not
intend to use it for a period of 2-3
months.
- Do not dispose of the batteries as
domestic waste.
The batteries must be disposed of
at a recycling centre to be treated
in a special manner.
To Next Page
Loading...
