30
GB
TIMER OPERATION
This function allows the air conditioning unit
to be turned on or off automatically at the de-
sired time.
TIMER ON (PROGRAMMED START UP)
Before programming the timed start up,
check that the air conditioning unit is set to
the desired operating mode.
Press the TIMER ON/CLOCK button; the sym-
bol “ON 12:00” will begin to fl ash on the dis-
play.
Use the
▲ or ▼ buttons to select the time
when you want to appliance to turn on. Press
▲ or ▼ once to increase or decrease the set
time by 1 minute. Press
▲ or ▼ for about 5
seconds to increase or decrease the set time
by 10 minutes. Keep
▲ or ▼ pressed for
more than 3 seconds to increase or decrease
the set time by 1 hour.
Confi rm the setting by pressing the TIMER
ON/CLOCK button again. The unit beeps, the
word ON on the display stops fl ashing and the
set time is displayed for about 5 seconds.
The TIMER LED located on the internal unit
lights up.
To deactivate the TIMER ON function, press
the TIMER ON/CLOCK button again; the unit
beeps and the TIMER LED on the internal unit
turns off.
Warning: if the programmed setting is not
confi rmed or cancelled, it will be deleted au-
tomatically after a few seconds.
To Next Page
Loading...
