10
Instructions for use (user)
Start-up
To start the water heater, press on the bipolar switch. The pilot lamp (a fig. 1) will stay
lit during heating.
Working temperature control
On models TI Q R, turn knob "f" anti-clockwise to increase the temperature, and turn
it clockwise to decrease it (as indicated in the diagram in fig.1).
On models TI Q B, turn knob "f" clockwise to increase the temperature, and turn it
anticlockwise to decrease it (as indicated in the diagram in fig.1).
N.B. to limit the formation of limescale, we recommend that you do not set the
working temperature to its maximum setting.
Cleaning
To clean the appliance, use hot water and liquid detergents that do not contain ammonia
or alcoholic substances, so as not to damage the surfaces.
Warning: the use of powder detergents could cause the surfaces of the appliance
to become scratched.
The data and characteristics indicated herein do not commit the Manufacturer,
who reserves the right to make all alterations and modifications deemed necessary
without having to give prior notice or to make replacements.
GB
To Next Page
Loading...
