17 / EN
WI-FI FUNCTION
For models equipped with user interface type shown in fi gure 10
For detailed information on the Wi-Fi confi guration and product registration procedure refer to the en-
closed, dedicated connectivity Quick Start Guide.
Account creation, fi gure 11
• First download and install the dedicated App on your mobile phone (App name can be found in the
quick start guide).
• Open the APP and click on SIGN UP; Fill in the fi elds.
• Open the registration reply message received in your mailbox and click on the link to activate the user
account
WI-FI confi guration, fi gure 12
• Press the Wi-Fi Button on the product’s control panel to activate the Wi-Fi (Wi-Fi button will blink slow).
• Press the Wi-Fi Button again for 5 seconds on the product’s control panel to create the Access Point
(Wi-Fi button will blink fast).
• Log in to Aqua Ariston NET App and follow the wizard to connect and register your product.
Procedure completed, fi gure 13
The connection is successful when:
• The wi-fi button is steady on.
• The app shows the successful registration message
If the connection fails, carefully check and repeat the above steps.
Note: the password cannot be Chinese characters. If there are any Chinese characters, please modify it.
App layout, fi gure 14
The following instructions are included:
•
Following functions are included:
• On/o (A)
• Manual mode (B)
• Program mode (C)
• ECO mode (D)
• POWER (E)
• Knob to select temperature(F)
• Remaining time (G)
• Number of showers (H)
Connection status description
WiFi
Button
Blinking slow The Wi-Fi is connected to the home network
Blinking Fast The Wi-Fi module is on Access Point mode
Steady on The Wi-Fi module is ON and Connected to the home network
O The Wi-Fi module is OFF
To Next Page
Loading...
Need help?
General
