Start with the Code line on the
bottom line of the display.
UNINHIBITING A ZONE
○○○○○○○○○○○○
○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○
○
○○○○○○○○○○○○○○○○○
This function is used to uninhibit zones and
include them into normal operation.
Press the MENU*button
Press ENTER
(see page 6 for more information on accessing menu options).
Enter your PIN code
○○○○○○○○○○○○○○○○
Press 11 and ENTER .
What happens next depends on whether or not
there are inhibited zones:
No inhibited zones - Press CLEAR to exit
programming
Inhibited zones– There are one or more
inhibited zones. These zones are listed either:
- one by one, or
- as a list of numbers.
When the zones are listed one by one, to scroll
use the NEXT button.
Depending on the state of the zone, you can
now:
• Uninhibit the inhibited zone -
lets you uninhibit the selected zones.
Press the Zone Nº and then ENTER .
When finished, press ENTER to return to the
beginning.
• Exit– lets you exit programming.
Press CLEAR.
○○○○○○
○○○○○○○○○○○
14 ATS User’s Manual
○○○○○○○○○