Need help?Do you have a question about the Aritech Axon x700 and is the answer not in the manual?
General| Partitions | 8 |
|---|---|
| Operating Temperature | -10°C to +55°C |
| Humidity | 95% non-condensing |
| Communication Ports | Ethernet, RS485 |
| Supported Protocols | SIA, Contact ID |
| Display | LCD |
Explains symbols and notations used throughout the manual for clarity.
Provides general clarifications and scope of the manual's coverage.
Guidance on when to arm the security system for full protection.
Instructions for partial arming of specific zones, e.g., perimeter protection.
Procedure for disarming the security system before entering protected areas.
Information on the allowed time to exit after arming the system.
Details on the required entry time to disarm the system before triggering an alarm.
Procedure for disarming the system when an alarm condition is active.
Reasons why areas may not be set or unset, including authorization and zone status.
Explanation of zones that are open and prevent system arming.
Information on system faults and inhibited zones that may affect arming.
Instructions for arming specific areas using an LCD keypad.
Procedure for partial arming of areas using an LCD keypad.
Procedure for disarming areas using an LCD keypad.
Instructions for arming areas using a keypad without an LCD screen.
Procedure for disarming areas using a keypad without an LCD screen.
Configuration and operation of automatic system arming at scheduled times.
How the system displays area status during arming and disarming operations.
Explanation of different alarm types and their causes.
Description of alarms heard locally within the premises and their handling.
Details on system-wide alarms, including tampering or faults, and their reset procedures.
How to view active alarms and their sources on the system display.
Procedure for switching off sirens or bells after an alarm event.
How to silence alarms without disarming the entire area.
Process for acknowledging active alarms after the cause has been resolved.
Troubleshooting steps when a PIN fails to acknowledge an alarm.
Diagnosis for keypads that are unresponsive or locked due to incorrect PIN entry.
Procedure for selecting specific areas for operation within the system menu.
Explanation of how menu options are numbered and referenced within the manual.
Factors influencing the availability of menu options, such as firmware and panel model.
Procedure to exclude or include specific zones from system arming.
Instructions for changing or managing user PINs.
Configuration for remote access settings, including login and password.
Procedure for setting the personal mobile phone number for GSM reporting.
Enabling or disabling SMS notifications for system events.
Access to system testing functions, including walk tests and input tests.
Procedure for testing system inputs, such as zones or expander modules.
Configuration for connecting to the UltraSync cloud service.
Setting a name to identify each push notification.
Displaying the smartphone notification identifier.
Viewing the active or inactive status of a notification.
Selecting event categories for push notifications to the smartphone.
Lists key sequences for operating the system via an LCD keypad.
Lists key sequences for operating the system via a keypad without an LCD screen.
To Next Page
