Axon x700 Control Panel User Manual 5
Using your PIN and/or card to access the
system
You need a PIN and/or a card to use the Axon x700 system. A PIN is a unique
number having between 4 and 10 digits.
The manager of the security system has set up your user account with a PIN
and/or card details. In addition, options have been assigned that allow you to
perform specific tasks, such as set or unset the system. You can only access
menu options that have been enabled for your user account. When you try to
access an option that you are not authorised to access, you get the following
error message:
If you access the menu and do not press any key for three minutes, the system
time out function automatically exits from the menu. It is good practice to exit the
menu using the Clear button rather than using this time out facility. If someone
else uses the menu before it times out, the option used is logged against your
user account.
To Next Page
Loading...
