Aritech Axon x700 - Shunting zones

22 Axon x700 Control Panel User Manual
3. If you do not have rights to inhibit the selected zone, the following warning is
displayed:
WARNING
No access
4. Press Clear to exit programming.
Shunting zones
1.2 Shunt zones
The shunt function is used to inhibit zones for a certain time period.
Enter the “Shunt zones” menu to switch zone shunts on or off.
1>Zone 1
Shunt off
1. Press Up or Down to scroll through the zones.
2. Press the zone number, or use Enter to select a zone.
3. Change the zone state using Up and Down.
4. Confirm the changes by pressing Enter.
5. Press Clear twice to exit programming.