To Next PageTo Next PageWhat to do if Arizona Instrument Jerome J505 Measuring Instruments says 'TEST RESULT MEMORY FULL'?
If your Arizona Instrument Measuring Instruments displays 'TEST RESULT MEMORY FULL READING NOT SAVED' or 'TEST RESULT MEMORY FULL AUTOSAMPLE DISABLED', it means the instrument has reached its storage limit of 10,000 test results. To resolve this, save the data to a USB flash drive if you wish to keep it, and then proceed to delete the data.
What to do if Arizona Instrument Measuring Instruments displays 'USB FILE FAILURE'?
A 'USB FILE FAILURE' message on your Arizona Instrument Measuring Instruments indicates an issue with the USB flash drive. This is likely due to the flash drive being unformatted or corrupt. The suggested solution is to format the flash drive or try using a different one.
What to do if readings with the Zero Air Filter installed are not less than 0.05µg/m3 on Arizona Instrument Jerome J505 Measuring Instruments?
If your Arizona Instrument Measuring Instruments readings aren't less than 0.05µg/m3 with the Zero Air Filter installed, it could be due to a contaminated intake fritware filter or a contaminated flow system. You should change the intake fritware filter. Additionally, set the instrument to Autosample at 1-minute intervals for 1 hour to purge the flow system.
General| Brand | Arizona Instrument |
|---|---|
| Model | Jerome J505 |
| Category | Measuring Instruments |
| Language | English |
Details the information displayed on the main screen and the function of softkeys.
Explains the three available test modes (Search, Quick, Standard) and their characteristics.
Covers instrument configuration options including autosampling, time, date, and result alarms.
Explains how to view, analyze, and save test results from the instrument's memory.
Details the process of exporting test results and analyses to a USB flash drive.
