Arjo Maxi Sky 440 - User Manual

Other manuals for Arjo Maxi Sky 440

Instructions For Use36 pages

Quick Reference Guide3 pages

Questions and Answers

T
Taylor ArmstrongAug 13, 2025
What to do if Arjo Mobility Aid lift does not work when pressing buttons?
- N
  Nicholas JohnsonAug 13, 2025
  If your Arjo Mobility Aid lift isn't responding to button presses, start by checking the emergency stop button to ensure it hasn't been activated; gently release it if it is. Also, verify that the hand control is properly connected to the lift, as it may appear plugged in but isn't fully seated. If the lift buttons are working, the issue might be with the hand control itself.
E
Elizabeth PenaAug 17, 2025
What to do if Arjo Lifting Systems lift does not work when pressing handset buttons?
- T
  Todd RiosAug 17, 2025
  If your Arjo Lifting Systems lift isn't responding to the handset, first ensure the emergency stop is not activated by gently releasing the emergency button. Then, check if the buttons on the lift itself are working. If the lift buttons work, the issue might be with the handset. Also, verify the handset is properly plugged into the lift. If none of these steps resolve the issue, it is recommended to contact your Arjo representative.
M
Mrs. Michelle AlvarezAug 21, 2025
What to do if the charger indicator on my Arjo Lifting Systems doesn't light up?
- D
  Daniel BaileyAug 21, 2025
  If the yellow charger indicator on your Arjo Lifting Systems lift doesn't light up when connected, the charger might not be properly plugged into a standard electrical outlet, or the outlet may not have power. Ensure the charger is correctly plugged into a functioning outlet. The green indicator light confirms the functionality of the charger.
T
Tara ReeseAug 25, 2025
Why does my Arjo Mobility Aid unit start and stop repetitively?
- H
  Holly MichaelAug 26, 2025
  Your Arjo Mobility Aid unit might be starting and stopping repetitively due to a couple of reasons. First, the load might be exceeding the safe working limit, triggering the motor's overload protection. Second, the batteries could be low and need to be charged.
C
charles53Aug 29, 2025
What to do if Arjo Maxi Sky 440 beeps during use?
- R
  Richard TapiaAug 29, 2025
  If your Arjo Mobility Aid emits a beep during use and potentially stops lifting (but can still lower), it's likely that the batteries are low. You should recharge them as soon as possible.
W
William LyonsSep 1, 2025
How to fix Arjo Maxi Sky 440 Mobility Aid charger indicator if it doesn't light up?
- C
  Catherine GatesSep 1, 2025
  If the yellow charger indicator on your Arjo Mobility Aid lift doesn't light up when connected, ensure the charger is properly plugged into a functioning standard outlet. A green light indicates that the charger is working correctly.
A
Amy RossSep 5, 2025
Why does my Arjo Lifting Systems beep during use?
- S
  Steven PetersonSep 5, 2025
  If your Arjo Lifting Systems lift beeps during use and potentially stops lifting but can still lower, this typically indicates that the batteries are low. To resolve this, recharge the batteries.
B
Billy Griffin DVMSep 9, 2025
Why does Arjo Lifting Systems unit start and stop repetitively?
- P
  Patrick CookSep 9, 2025
  If your Arjo Lifting Systems unit starts and stops repetitively, it could be due to a couple of reasons. First, the load might be greater than the unit’s safe working load, triggering an overload protection on the motor, which will prevent it from functioning. Another possibility is that the batteries are low, in that case you should change the batteries. If changing the batteries does not solve the problem, contact your local Arjo representative.

Summary

Introduction and Manual Guide

Foreword and Support

Guidance on reading the manual, service, and supplier information.

Understanding the Manual

Explains symbols, warnings, intended use, and operational life.

Safety Instructions and Product Labels

General and Specific Safety Advice

Covers overall safety guidelines, important advice, and specific precautions.

Hazard Prevention

Details measures for shock prevention, fire/explosion, and human/environment safety.

Product Labels and Identification

Explains labels on the lift, battery, and charger for identification and compliance.

Component Identification and Operation

Part Designation

Identifies and lists the main components of the lift cassette and charger station.

Operating the Maxi Sky440

Covers emergency procedures, battery charging, and resident transfers.

Use of Slings

Details sling attachment procedures and resident lifting/transport techniques.

Care, Maintenance, and Troubleshooting

Maintenance Schedules and Procedures

Outlines preventive maintenance, daily checks, and inspection guidelines.

Component Care and Replacement

Covers strap inspection, battery replacement, and sling care.

Annual Servicing and Troubleshooting

Details annual inspection requirements and troubleshooting common issues.

Technical Specifications and Accessories

Technical Specifications

Provides detailed technical data on the lift, battery, and charger.

Available Accessories

Lists and describes optional accessories for the Maxi Sky440 lift.

Arjo Maxi Sky 440 Specifications

General

Lifting Capacity	200 kg
Weight	85 kg
Power Source	Electric
Emergency Lowering	Yes
Controls	Hand control
Foldable	No
Adjustable	Yes
Lifting Speed	4.5 cm/s
Seat Width	Not applicable
Seat Depth	Not applicable
Backrest Height	Not applicable
Armrest Height	Not applicable
Seat Material	Not applicable
Backrest Material	Not applicable
Armrest Material	Not applicable
Brakes	Yes

Related product manuals

Arjo Voyager

32 pages