Arkray SPOTCHEM EL User Manual

Provides an overview of the analyzer's features and specifications.

Highlights key features and benefits of the SPOTCHEM EL SE-1520.

Details the contents included in the analyzer's packaging.

Identifies and describes the analyzer's components and their functions.

Identifies and describes the front-facing components of the analyzer.

Describes the buttons and their functions on the operator panel.

Identifies and describes the components on the back of the analyzer.

Describes the parts and functions of the twin pipette.

Describes the parts and functions of the Twin Pipette II.

Guides the user through the installation process of the analyzer.

Provides critical safety precautions for analyzer setup.

Details the initial setup steps, including removing fixtures.

Guides through initial power-on, display adjustment, and setup.

Safety precautions for moving the instrument.

Provides an overview of measurement procedures.

Outlines the step-by-step process for operating the analyzer.

Lists important safety considerations during measurement.

Essential safety warnings and environmental requirements for operation.

Instructions on safe handling of biological samples.

Instructions for safe handling of E-Plates.

Details the necessary preparations before measurement.

Lists necessary items and preparations before measurement.

Details the analyzer startup procedure.

Steps to check before starting a measurement.

Details the procedure for preparing samples.

Instructions for drawing reference solution and samples.

Explains the measurement process.

Explains the steps for performing a normal measurement.

Covers the calibration procedures for the analyzer.

Explains the necessity and process of calibration.

Details the procedure for magnetic card calibration.

Describes how measurement results are displayed and printed.

Explains how to print normal measurement results.

Introduces the sub-menu structure and navigation.

Outlines the structure and navigation of the analyzer's menus.

Explains options for managing measurement results.

Describes how to print stored measurement results.

Explains how to send measurement results to an external device.

Details the process for deleting stored measurement results.

Explains the use of wildcards for searching measurement results.

Details how to set and manage analyzer parameters.

Describes how to print current parameter settings.

Guides through setting various analyzer parameters.

Describes how to reset parameters to factory defaults.

Provides access to maintenance functions.

Instructions for cleaning the analyzer's probe.

Details cleaning the analyzer's table area.

How to perform a check measurement.

Allows selection of different operating modes.

Explains how to activate and use the Survey Mode.

Covers setting the analyzer's internal clock.

Provides an overview of maintenance.

Shows a table of parts requiring maintenance and their frequencies.

Details routine daily maintenance tasks.

Instructions for cleaning the plate tray.

Details cleaning the plate transfer part.

Covers maintenance tasks performed at regular intervals.

Guides on replacing the thermal printer paper.

Details cleaning the probe, including performing a check measurement.

Instructions for cleaning the Twin Pipette II.

Details the replacement of nozzle O-rings.

Lists and explains error codes and their remedies.

Lists and explains trouble messages and their remedies.

Provides details on data transmission specifications.

Describes the format for external data output.

Explains the structure of data blocks for transmission.

Details the format of measurement results for output.

Information regarding warranty and repair services.