EasyManua.ls Logo

ARM AMBA NIC-301 User Manual

Default Icon
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Copyright © 2006-2010 ARM. All rights reserved.
ARM DDI 0397G (ID031010)
AMBA
®
Network Interconnect (NIC-301)
Revision: r2p1
Technical Reference Manual
Question and Answer IconNeed help?

Do you have a question about the ARM AMBA NIC-301 and is the answer not in the manual?

ARM AMBA NIC-301 Specifications

General IconGeneral
TypeNetwork Interconnect
AHB Master PortsConfigurable
AHB Slave PortsConfigurable
Max Number of Masters16
Max Number of Slaves16
Address Width32-bit
ArbitrationRound-robin, Fixed priority
Quality of Service (QoS)Supported
Low Latency PathSupported
ArchitectureAMBA
Bus InterfaceAHB
Protocol SupportAMBA AHB, AMBA APB
Data Width32-bit
Interconnect TopologyCrossbar
Power ManagementClock gating
FeaturesQoS support, power management
Configuration Optionsarbitration scheme
Typical ApplicationsSoCs, embedded systems

Summary

Chapter 1: Introduction

Key Features

Details the configurable capabilities and supported features of the AMBA Network Interconnect.

Product Revisions

Describes functional differences between various product revisions of the NIC-301.

Chapter 2: Functional Description

Interfaces

Details the slave and master interfaces supported by the AMBA Network Interconnect.

Operation

Explains operational aspects like data width conversion, synchronization, and arbitration.

Chapter 3: Programmers Model

Configuration Programmers Model

Details the configuration registers and their partitioning into 4KB blocks.