Need help?Do you have a question about the Armada Technologies Pro48 and is the answer not in the manual?
General| Brand | Armada Technologies |
|---|---|
| Model | Pro48 |
| Category | Test Equipment |
| Language | English |
Details the Pro48K kit contents and lists the functions of the Pro48 tester.
Warns against connecting Pro48 to 120V+ and about 36V output.
Tests the Pro48's internal batteries for adequate voltage.
Verifies the voltage output from the irrigation clock/controller.
Checks if the Pro48 can activate and test solenoids connected to the clock.
Tests solenoid activation and condition directly at the irrigation valve.
Explains how to activate and deactivate DC latching solenoids using the Pro48.
Uses the chatter function to locate a specific solenoid valve.
Explains how to send a tone signal for wire identification.
Details how to use the Pro210F tone probe to receive and trace signals.
Lists electrical specifications for voltage, battery, and output.
Specifies activation range based on wire gauge and condition.
Provides physical dimensions and weight for the Pro48 and Pro210F.
Outlines operating and storage temperature limits.
General instructions for replacing batteries in Armada devices.
Specific steps for installing two 9V batteries into the Pro48 unit.
Specific steps for installing four AA batteries into the Pro210F probe.
Details the 12-month limited warranty on Armada products.
Procedure for obtaining Return Material Authorization (RMA) for repairs.
Contact details and address for Armada Technologies service and support.
To Next Page