Armada ARC20-MPPT - Page 2

2
1. Warnings and Tools Icon Chart
Icons
Name
Description
High Voltage
High voltage device.
Installation should be performed by an electrician.
High Temperature
This device will produce heat.
Mount device away from other items.
Environmental Hazard
Electronic Equipment. Do not put in landfill.
Wire Cutter
A wire cutter is needed for cutting and stripping wires prior to
connection.
Multimeter
A multimeter is needed for testing equipment and verifying polarity
of cables.
Anti-static Glove
Anti-static gloves are recommended to prevent controller damage
caused by static electricity.
Electrical Tape
Electrical tape is recommended to safely insulate spliced or bare
wires.
Screwdriver
A common size screwdriver is needed to attach wires to the
controller.