2. Safety Tips
• Review this manual thoroughly before attempting installation.
• Beware of any nearby electrical equipment that may interfere with installing this device.
• Solar panels can generate high voltages and currents, make sure your solar panels are completely covered from
sunlight during installation. It is recommended that installation be performed by a qualified electrician.
• Connecting wires to this device can generate sparks, please wear proper insulation gear while installing this device.
• To avoid damage to the battery or controller, use proper fuses in wiring. Please do not hesitate to contact the
professions if you need help with fuse sizing.
• Always keep children away from this device.
• Be certain to use the correct gauge of wire, see below for a table of recommended wire size for various current
loads.
To Next Page
Loading...