Description & Quick Troubleshoot
Battery voltage is too low.
DC load will be turned off until battery re-charges to recovery voltage.
Battery voltage has exceeded controller limit.
Check battery bank voltage for compatibility with controller.
DC load power draw exceeds controller capability. Reduce load size or
upgrade to a higher load capacity controller.
Controller exceeds operating temperature limit.
Ensure the controller is placed in a well-ventilated cool, dry place.
Solar array amperage exceeds controller rated input amperage.
Decrease the amperage of solar panels connected to the controller or
upgrade to a higher rated controller.
Solar array voltage exceeds controller rated input voltage.
Decrease the voltage of solar panels connected to the controller.
Solar array input wires connected with reverse polarity.
Disconnect and re-connect with correct wire polarity.
Battery connection wires connected with reverse polarity. Disconnect
and re-connect with correct wire polarity.
*Please contact ARMADA professions for technical support on additional troubleshooting.
To Next Page
Loading...