Armada pro800 User Manual

Armada Technologies Pro800 Hi-Power Wire and
Valve Locator
Operating Instructions
WARNING – Read and understand the instructions before operating this
unit. Failure to do so could lead to injury or death.
The Armada Technologies Pro800 Hi-Power wire and valve locator is designed to track
underground wiring and find lost sprinkler valves. In addition, broken or severely
damaged wires may also be located. The complete Pro800 kit consists of:
 (1) Pro800R Receiving Wand
 (1) Pro800T Transmitter and Carrying Case
 (1) ProH1 Mono Headset
 (1) Wall Charger and (1) Car Outlet Charger
 (1) ProGS Ground Stake
 (1) Set of Black/Red Connecting Leads
 (1) Operating Manual
 (1) 12v Rechargeable and (1) 9v Regular Batteries

Please be sure that all items are included before operating the Pro800.

Armada pro800 Specifications

General

Brand	Armada
Model	pro800
Category	Measuring Instruments
Language	English

Summary

Introduction to Pro800 Wire and Valve Locator

Important Safety Warning

Critical instruction to read before operation to prevent injury or death.

Pro800 Kit Contents

Lists all items included in the complete Pro800 kit.

Understanding the Pro800 System

Theory of Cable Locating

Explains signal transmission, path of least resistance, and return paths.

Transmitter Battery Details

Describes the 12-volt rechargeable battery for the transmitter.

Battery Management and Safety

Battery Installation Guide

Step-by-step instructions for installing transmitter and receiver batteries.

Charging and Safety Precautions

Covers battery charging, low battery indicators, and clip safety warnings.

Getting Started with Pro800 Operation

Grounding and Mode Setup

Instructions for ground stake placement and selecting operational modes.

Transmitter Power Adjustment

Guidance on setting the transmitter power output for optimal tracing.

Receiver Controls Overview

Identifies and explains the functions of the Pro800 receiver's controls.

Advanced Tracing and Fault Detection

Wire Tracing Techniques

Details how to trace wires using Null and Peak signal reception.

Identifying Wire Breaks and Nicks

Explains how to detect wire damage by observing signal drops.

Locating Valves and Using Broadcast Mode

Finding Solenoids and Valves

Describes two methods to accurately locate underground solenoids and valves.

Understanding Broadcast Mode

Explains Broadcast Mode for tracing non-solenoid lines and its application.

Broadcast Mode, Depth, and Accuracy

Broadcast Mode Operation

Details how to use Broadcast Mode and its limitations.

Determining Depth and Accuracy

Techniques for estimating target depth and verifying locate accuracy.

Helpful Hints for Locating

Tips on interpreting signals, anomalies, and soil conditions.

Operational Tips and Warranty Information

Soil Condition and Learning

Discusses soil's impact on performance and recommends practice.

Product Warranty and Contact

Outlines the product warranty and provides contact information.