Page 5For technical questions, please call 1-888-866-5797.Item 57326
NOAA Weather Channels
1. To Access NOAA Weather Channels:
a. Press and hold UP button for 3 seconds
until ‘RX’ icon appears and ‘Weather’ icon
flashes, then press POWER button ONCE.
b. Use the UP and DOWN buttons to find
the desired weather channel.
c. Press TRANSMIT button to set channel.
d. Press and hold UP button again for 3
seconds to exit NOAA channels.
NOAA Weather Alert
1. To Receive NOAA Weather Alert:
a. Press and hold UP button for three seconds
until ‘RX’ icon appears and ‘Weather’ icon
flashes. Press POWER button TWICE and
‘AL OFF’ notification will appear on display.
b. Use the UP and DOWN buttons to turn the
alert system ON or OFF. If a message is
present, an alarm will sound for 20 seconds.
c. Press any button to listen to the message.
Maintenance and Servicing
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Make sure that the Switch is in the off-position and before performing any procedure in this section.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration
occurs, have the problem corrected before further use.
Cleaning, Maintenance, and Lubrication
1. BEFORE EACH USE, inspect the general
condition of the tool. Check for:
• loose hardware
• misalignment or binding of moving parts
• cracked or broken parts
• any other condition that may
affect its safe operation.
2. AFTER USE, wipe external surfaces
of the tool with clean cloth.
Record Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Replacement parts are not available for this item.
Reference UPC 792363573269.
To Next Page
Loading...