SAFETY PROVISIONS
When using DCN-2 for its intended purpose, it is necessary to comply with the
requirements of safety measures defined by the "Rules on Labor Protection during Operation
of Electrical Installations" when working with electrical receivers with a voltage of up
to 1000 V.
For fire safety reasons, the following rules must be observed:
before connecting, check for damage to the insulation of the loop;
avoid damaging the loop.
To avoid the risk of electric shock, it is forbidden:
to operate the product with a damaged power and communication cable.
It is strictly forbidden to disassemble the product connected to the central.
Do not use the product in rooms with high humidity (above 80%) or the presence of
conductive dust.
The safety provisions relating to the specific operations outlined in this manual are
indicated by the following sign:
To Next Page