Arneg Mini Astana LX - User Manual

172 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Manuale di Installazione e Uso -

original

-

Direction for Installation and Use

Ausstellung und Gebrauchsanweisungen

Manuel d’Installation et de Service

Guía de Instalación y Manejo

Инструкции по монтажу и эксплуатации

IMPORTANTE: Leggere attentamente prima dell’uso. Conservare per una futura consultazione.

IMPORTANT: Carefully read before use. Keep in store for future use.

YOUR GLOBAL PARTNER FOT RETAIL SOLUTIONS

Astana LX - Mini Astana LX

Vertical glass-door • Remote

Table of Contents

Questions and Answers

M
Maria MooreAug 9, 2025
Why does my Arneg Mini Astana LX cabinet stop and not restart?
- T
  Thomas ThompsonAug 9, 2025
  The Arneg Display Case might fail to restart due to several reasons: * A power black-out: check the cause of the black-out. * The master switch is turned off: turn on the switch. * The plug is detached: insert the plug. * Breakers triggered (fuses, thermal breakers/differential switches): check the temperature of the condensing unit. * Electric controller faulty: replace the controller.
R
rickyhowardAug 15, 2025
Why is my Arneg Display Case cabinet temperature too high or too low?
- J
  Joseph Thompson DDSAug 15, 2025
  The temperature inside the Arneg Display Case might be incorrect due to: * Poor room conditions: check the position of the cabinet inside the store. * Output air temperature is outside the specified range: check the operation of the evaporator fan. * The cabinet is defrosting: check wiring and input voltage. * The capacitor or the evaporator are freezing: the fans are installed reversely; check and restore the airflow direction. * The capacitor or the evaporator are obstructed or dirty: check that the fan plenum is sufficient and not obstructed. * Uneven load distribution: load the goods in an orderly fashion.
M
Monica EricksonAug 22, 2025
What to do if my Arneg Display Case does not cool sufficiently?
- M
  mandy87Aug 22, 2025
  If your Arneg Display Case isn't cooling properly, it could be due to the following reasons: * The cabinet is in defrosting phase: wait for defrosting to complete (about 30min). * Air inlets are obstructed: release air inlets. * The load is not distributed evenly: load the goods in an orderly fashion. * The cabinet is next to air currents or heat sources: check the position of the cabinet inside the store. * The cabinet is not levelled: level the cabinet. * Evaporator frozen: thaw it.
A
allenbowersAug 27, 2025
Why is there condensate forming in my Arneg Mini Astana LX Display Case?
- J
  John TranAug 27, 2025
  Condensation in your Arneg Display Case can occur due to: * Poor room conditions: check the position of the cabinet inside the store. * Poor air ventilation: check the operation of fans and wiring. * The window heaters do not work: check electrical connections. * The windows are not closed properly: close the windows properly.
C
Clarence RussellSep 3, 2025
How to fix a noisy engine in my Arneg Display Case?
- A
  alyssamooreSep 3, 2025
  A noisy engine in your Arneg Display Case could be caused by: * Screws and bolts are not tightened: tighten the bolts and screws. * The cabinet is not levelled: level the cabinet.

Summary

System Start-up and Configuration

Temperature Controller Operation

How to operate and adjust the temperature controller.

Power Connection and Safety

Procedures and safety measures for connecting the electrical power.

Technical Diagrams and Schematics

Connection Diagrams

Detailed diagrams for electrical and plumbing connections for Astana LX and Mini Astana LX.

Electrical Schematics

Wiring diagrams for remote and built-in condensing units.

Safety, Liability, and Usage Guidelines

Safety Messages and Warnings

Explanation of hazard indicators and essential safety messages.

Safety Labels on the Counter

Identification and meaning of safety labels affixed to the cabinet.

Personal Protective Equipment (PPE)

Required PPE for technicians performing installation and maintenance.

Prohibitions and General Provisions

Rules and prohibitions for safe operation and handling.

Counter Usage Rules and Prohibitions

Specific rules for using the refrigerated cabinet and actions to avoid.

Glass Door Handling and Safety

Residual Risks and Emergency Preparedness

Potential risks and measures for their reduction during operation.

Usage Guidelines and Precautions

Handling and Storing Goods

General Usage Precautions

Important precautions to take during the everyday use of the cabinet.

Manual Scope and Product Description

Intended Use of the Cabinet

Description of the cabinet's intended application and function.

Standards, Certifications, and Compliance

Rating Plate Information and Specifications

Explanation of the data and specifications found on the cabinet's rating plate.

Energy Label and Technical Data

Energy Label Explanation

Technical Specifications and Performance

Detailed technical data, dimensions, and performance characteristics.

Transport and Storage

Transport Procedures and Safety

Guidelines for safely transporting the cabinet, including handling and lifting.

Installation Procedures and Cabinet Joining

Installation Safety and Area Requirements

Safety measures and site preparation for installation.

Step-by-Step Installation Guide

Detailed instructions for installing the cabinet.

Installation Avoidance Recommendations

Joining Multiple Cabinets

Electrical Connection

Power Supply Requirements

Specifications for the electrical power supply and its connection.

Electrical Safety and System Checks

Automatic Safety Switches and Protection

Details on safety switches, circuit breakers, and protective measures.

Built-in Unit Electrical Connection

Specific connection instructions for units with built-in condensing systems.

Pre-Connection Checks and Safety

Temperature Adjustment and Cabinet Loading

Temperature Checking and Adjustment

Cabinet Loading Safety Precautions

Post-Cleaning Inspection and System Operations

Refrigerant Handling and Safety

Critical safety procedures for handling refrigerants during operations.

Cabinet Dismantling and Waste Disposal

Troubleshooting Guide

Cabinet Start-up and Cooling Issues

Solutions for problems related to cabinet start-up and insufficient cooling.

Operation and Condensate Problems

Water Leaks, Bad Smell, Frost, and Ice

Arneg Mini Astana LX Specifications

General

Category	Display Case
Model	Mini Astana LX
Refrigerant	R290
Capacity	Varies by model
Shelves	Adjustable
Lighting	LED
Weight	Varies by model
Defrost System	Automatic

Related product manuals

Preview: Arneg Astana LX

Arneg Astana LX

Arneg Mini Ankara Twin 4P Series

Arneg Sydney 3 VCB Series