9
Installing the Fragrance Bottle
1. Screw the bottle into the diffuser
2. Insert the bottle and diffuser into the base part
3. Lock it firmly
Cleaning the Diffuser
1. To ensure your diffuser runs seamlessly, make sure to clean it every time you refill the
bottle or use a new essential oil.
2. If you can no longer smell the scent:
3. Check to make sure bottle is not empty.
4. If the bottle is full but still not diffusing the fragrance, then the diffuser may be
clogged and needs to be cleaned out with rubbing alcohol.
How to Clean your Diffuser
1. Turn the device off.
2. Unscrew the bottle and replace the essential oil with rubbing alcohol.
3. Screw the bottle into the AroMini and let it run for 10-15 minutes.
4. When 10-15 min is up replace rubbing alcohol with your essential oil.
To Next Page
Loading...
